Main 5) PRODUCT LINE BY MANUFACTURE F&B PERFORMANCE
"Renzoni" Mount - 5.2l, 5.9l Air Hat hold-down
MODEL #F&B PERFORMANCE
PART #R1

All F&B throttle bodies with 3 1/4-20 tapped holes in top. This mount allows the installation of airhats that measure 1.6" or more in height (inside dimension). Allows the ultimate in sealing f...
$33.00
(CURRENTLY NOT AVAILABLE) 1999-2007 4.7L - THROTTLE BODY
MODEL #F&B PERFORMANCE
PART #1x68/70/72

(CURRENTLY NOT AVAILABLE) All F&B products are CNC machined from the highest quality raw materials Body material is 6061-T6 aluminum with a clear sulfuric anodized coating.
$385.00
1991-2003 4.0L Jeep Straight 6 & Stroked motors (4.2L - 5.0L)
MODEL #F&B PERFORMANCE
PART #1x62/66/68J

F&B Jeep throttle bodies are available in 62mm, 66mm and 68mm bore diameters (stock is 60mm necked to 56mm). Some intake manifold porting should be done to enlarge the manifold opening.
$365.00
1992-2003 - 3.9L V6 - STOCK TO MILD
MODEL #F&B PERFORMANCE
PART #2x48

The F&B 48mm throttle body comes with a new factory gasket, all new 18-8 stainless steel cap screws for your factory sensors, stainless steel hold down bolts, and the F&B billet seal nut for your A...
$400.00
1992-2003 5.2L / 5.9L V8, & Modified 3.9L V6
MODEL #F&B PERFORMANCE
PART #2x50

The 50mm throttle body features a profiled 303 ss shaft with impregnated molybdenum finish. Comes with new factory gasket, all new 18-8 stainless steel cap screws for your factory sensors, stainles...
$400.00
1992-2003 Modified 5.2L & 5.9L V8
MODEL #F&B PERFORMANCE
PART #2x52

The F&B 52mm throttle body features a radically profiled 17-4 Stainless steel throttle shaft and 52mm bores. It comes with a new factory gasket, all new 18-8 stainless steel cap screws for your fac...
$460.00
1992-2003 Stroked 5.9L V8
MODEL #F&B PERFORMANCE
PART #2x52x55

The F&B 52x55mm throttle body features a radically profiled 17-4 PH stainless steel shaft for maximum flow and 52x55mm Oval bronze plates. This TB flows the equivalent of two 56mm bores.
$475.00
1992-2003 Stroked 5.9L V8
MODEL #F&B PERFORMANCE
PART #2x58

The F&B 58mm throttle body features a radically profiled 17-4 PH stainless steel shaft for maximum flow and 58mm equivalent plates. This TB flows the equivalent of two 58mm bores.
$495.00
1994-2002 Viper V10 - Viper Fuel Rails Kit
MODEL #F&B PERFORMANCE
PART #FRV

New F&B low profile fuel rails capable of supporting over 1300hp! Designed for most top feed injectors, these fuel rails have four 3/8 NPT inlets/outlets for maximum flexibility in running your fue...
$630.00
1994-2002 Viper V10 - All
MODEL #F&B PERFORMANCE
PART #P/N 62/66/68mm V

F&B Viper throttle bodies are available in 3 sizes (62mm, 66mm and 68mm) to provide additional air for "street stock" to stroked and blown Vipers.
$580.00
2002-2003 5.9L Rams - W/Stock air inlet system "Ram Ring"
MODEL #F&B PERFORMANCE
PART #R2

This is required to use the stock Ram air inlet system with the F&B line of throttle bodies. The re-designed for 2002 air inlet system is a good flowing design superior to the older systems.
$45.00