Main
1999-2007 4.7L JTEC & NGC - COMPLETE PISTON ENGINE REBUILD KIT
LOCATOR ID: 1535
BRAND: EngineTech
PART #4.7L ENGINE KIT

Price:
$795.54
FREE SHIPPING!

Basic Options:

Additional Options:
** ADD / INFO PLEASE SELECT ALL THAT APPLY BELOW - Only the "ADD" options add to the total.
additional $0.00
** ADD 2 - NEW AIRRAM 32-TOOTH CRANKSHAFT TONE RING
additional $138.00
** ADD 3 - NEW AIRRAM 16-TOOTH CRANKSHAFT TONE RING
additional $138.00
** ADD 4 - Oil Pan Gasket /Windage tray
additional $45.00
*01) 00-02 DODGE 4.7L <> JTEC HO <> Rebuild 287 P / 10:1cr HO Pistons (Additional Cost)
additional $30.00
*01) 02-03 DODGE 4.7L <> NGC HO <> Rebuild 287 AP / 10:1cr HO Pistons (Additional Cost)
additional $30.00
*01) 04-07 DODGE 4.7L <> NGC HO<> Rebuild 287 BP / 10:1cr HO Pistons (Additional Cost)
additional $30.00
*02) 02-03 JEEP 4.7L <> NGC HO <> Rebuild 287 EP / 10:1cr HO Pistons (Additional Cost)
additional $30.00
*02) 04 JEEP 4.7L <> JTEC HO <> Rebuild 287 CP / 10:1cr HO Pistons (Additional Cost)
additional $30.00
*02) 04-07 JEEP 4.7L <> NGC HO <> Rebuild 287 BP / 10:1cr HO Pistons (Additional Cost)
additional $30.00
00* INFO - PLEASE SELECT YEAR/MAKE OF VEHICLE BELOW
additional $0.00
002) INFO - 99-03 JEEP 4.7L <> JTEC <> Rebuild 287 P
additional $0.00
002) INFO - 99-03 JEEP 4.7L <> JTEC HO <> Rebuild 287 P / 10:1cr HO Pistons (Additional Cost)
additional $0.00
01) INFO - 00-02 DODGE 4.7L <> JTEC <> Rebuild 287 P
additional $0.00
01) INFO - 02-03 DODGE 4.7L <> NGC <> Rebuild 287 AP
additional $0.00
01) INFO - 04-07 DODGE 4.7L <> NGC <> Rebuild 287 BP
additional $0.00
02) INFO - 02-03 JEEP <> NGC <> Rebuild 287 AP
additional $0.00
02) INFO - 04 JEEP 4.7L <> JTEC <> Rebuild 287 CP
additional $0.00
02) INFO - 04-07 JEEP 4.7L <> NGC <> Rebuild 287 BP
additional $0.00
a* INFO - PLEASE SELECT PCM OPTION A or B

JTEC 16-TOOTH TONE RING or NGC 32-TOOTH TONE RING

additional $0.00
a. INFO - JTEC - 3-PLUG PCM - 16-TOOTH CRANKSHAFT TONE RING
additional $0.00
b. INFO - NGC - 4-PLUG PCM - 32-TOOTH CRANKSHAFT TONE RING
additional $0.00

Combo Deals:
1999-2005 4.7L - 16x CONNECTING ROD BOLTS
PART #06508504AA
$87.00  $82.00
 (FREE SHIPPING!)
Add to your order and save $5.00
1999-2007 4.7L - FULL PRIMARY & SECONDARY MAIN GIRDLE BOLT KIT - FACTORY - (28x bolts)
PART #MULTIPLE
$105.00  $100.00
 (FREE SHIPPING!)
Add to your order and save $5.00
1999-2007 4.7L - REPLACEMENT HEAD BOLTS kit
PART #20x 6505528AA/8x 6506785AA
$145.99  $140.99
 (FREE SHIPPING!)
Add to your order and save $5.00
1999-2007 4.7L - SOLID Lash Adjusters (x16)
PART #47L00116
$335.55  $330.55
 (FREE SHIPPING!)
Add to your order and save $5.00
1999-2007 4.7L THROTTLE BODY ADAPTER & BRACKET KIT to 2008-2011 INTAKE MANIFOLD
PART #TBA002
$259.95  $254.95
 (FREE SHIPPING!)
Add to your order and save $5.00
1999-2008 4.7L - ARP HIGH PERF HEAD STUD KIT
PART #ARP47HEAD1
$401.28  $396.28
 (FREE SHIPPING!)
Add to your order and save $5.00

Subtotal
Shipping & Handling
Total
(Florida residents, add 7.00% tax)
 
 
 

Description:
This is a Complete Engine Rebuild Kit with high quality pistons. These kits includes all the necessary parts to completely rebuild your engine. Your choice of Base 9:1cr or 10:1cr H/O pistons... We can set your base 4.7L with H/O (10:1cr) pistons for an increase bump in performance!


Details:
This kit comes with:

Pistons: Size Available STD, +.020, +.030, +.040 Pistons Rings: Size Available STD, +.020, +.030, +.040
Rod bearings: Size Available STD, +.010, +.020, +.030
Main Bearings: Size Available STD, +.010, +.020
Thrust washers

Full Gasket set includes:
2x CYL HEAD GSKT
2x EXH MANIFOLD GSKT
1x TIMING COVER SEAL
8x INT MANIFOLD GSKT
4x MISC "O" RING
1x REAR MAIN SEAL
1x THROTTLE BODY GSKT
1x TIMING COVER GSKT
2x VALVE COVER GSKT
16x VALVE STEM SEAL
1x WATER PUMP GSKT

NOTE: Oil pan gasket NOT included. (Can be added for $50.00.)
IMPORTANT NOTICE: This is a standard/Stock. Oversize pistons, piston Rings, Rod bearings and Main Bearings are available at no extra cost. Please specify sizes needed at checkout. Otherwise the kit will ship with standard sizes.

IMPORTANT - This kit is intended for both the 4.7L JTEC & NGC engines. Typically the JTEC engines are found in PRE-2003 Jeeps, Rams, Dakotas & Durangos. The NGC engines are found in 2003-UP Jeeps, Rams, Dakotas & Durangos.

The easiest way to identify which engine you have is to locate the PCM and count the plugs. If you have a 3-Plug PCM then you have a JTEC 16-tooth crankshaft tone ring. If you have a 4-plug PCM then you would have the NGC 32-tooth PCM. Please make sure you select either NGC or JTEC PCM so we can insure the correct timing set is shipped with your kit the first time.

These 4.7L rebuild kits only use high-quality, name brand parts such as Federal Mogul, Silvolite, Hastings, Cloyes, Clevite, Topline, Elgin, King, Perfect Circle, and Melling. Our supplier has been remanufacturing quality Gas & Diesel Engines for over 25yrs and they use these exact same parts. They wouldn't offer 3yr/100k (gas) and 3yr/200k (diesel) warranties on their engines if they didn't believe in the quality of these parts.

This kit DOES NOT come with camshaft and lifters. That makes it a REBUILD KIT. If you need camshaft and lifters, then you will want to buy a MASTER KIT.

NOTICE: This is a Standard/Stock Size Kit. Oversize Pistons, Piston Rings, Rod Bearings and Main Bearings are available at no extra cost. Please specify sizes needed at checkout, via Paypal Notes OR Email, otherwise your kit will ship with Standard Sizes.

We ship a lot of products, and sometimes our inventory changes before updates can be made. Because of that, there are no specific brand requests available, and we hold the right to substitute a part with one of equal or greater quality. We will only ship high quality parts that we ourselves use in our repairs and our personal vehicles. We don't mess around with cheap stuff, it's a waste of our time and yours.


Modifications:
CRANKSHAFT TONE RINGS

With our AIRRAM crankshaft tone rings you can take ANY 2003-UP engine and install it into your 1999-2002 vehicles or put any 1999-2002 engines and install it into any 2003-2007 vehicles! All you need to do is swap in the correct 16-tooth or 32-tooth crankshaft tone ring to match the PCM (NGC or JTEC)operating the vehicle and it will run as long as the correct camshaft tone ring is used of course!

Here is how it works!

JTEC = 3=PLUG PCM + 16-TOOTH CRANKSHAFT TONE RING + MATCHING PASSENGERS SIDE CAMSHAFT TONE RING.

NGC = 4=PLUG PCM + 32-TOOTH CRANKSHAFT TONE RING + MATCHING PASSENGERS SIDE CAMSHAFT TONE RING.

Its important that you use the correct camshaft tone ring with engine as they do NOT enterchange and they are specific to the PCM's as well. Easist way to get it right is to re-use the passengers side cam sprocket/tone ring that came with the engine you are replacing. OR use the correct timing set up for the YEAR of that vehicle.

Example: You can NOT use the Camshaft tone ring from a 2007 NGC engine on a 1999 JTEC engine. If you do it will NOT run!

Our CrankShaft Tone Rings allow you to pick any 1999-2007 engine and replace what ever year your needing to replace simply by changing out the tone ring to match your PCM!

If you need more help please feel free to contact us...