COMP Cams – Beehive 26125-16 “HIGH LOAD”

Search

Vehicle Parts Filter

0 My Garage:
Vehicles History
Easily navigate the latest vehicles selected

You are yet to start searching vehicles

Add a Vehicle

COMP Cams – Beehive 26125-16 “HIGH LOAD”

High performance engines put rigorous demands on valve springs and Comp Cams’ springs are designed from the beginning for durability and long life.

 

Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.t goes here
These springs are better suited for high RPMs and boosted applications on the Chrysler 4.7L however may be used on multiple other engine builds. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet their cam requirements.

Comp Cams valve springs are made from materials developed by collaboration between their own engineers and metallurgists. What this means for you is that Comp Cams valve springs are made from the best possible materials for your specific application.

Brand – COMP Cams

Manufacturer’s Part Number – 26125-16

Part Type – Valve Springs

Product Line – COMP Cams Valve Springs

Number of Springs Per Valve – Single

Outside Diameter of Outer Spring – (in) 1.061 in.

Coil Bind Height – (in) 0.952 in.

Damper Spring Included – No

Inside Diameter of Outer Spring – (in) 0.738 in.

Valve Spring Style – Beehive

Coated – No

Quantity – Sold as a set of 16.

Notes – O.D. at top of spring is 0.959 in. and I.D. at top is 0.636 in.

Recommended Camshaft Style – Roller hydraulic

Installed Height (in) 1.570 in.

Seat Pressure at Installed Height (lbs) 120 lbs.

Open Height (in) 1.020 in.

Open Pressure (lbs 275 lbs)

COMP Cams warrants its products to be free from defects in material and workmanship for one year from the date of purchase. This warranty is valid on camshafts only where new lifters and proper valve springs are used. This warranty is voided on any part used in racing applications or any cam part ending in -5, -6, -7, -8, or -9. Ultra Gold aluminum rocker arms carry a limited lifetime warranty.

$279.95

1 in stock

1 in stock

Frequently purchased with this intake.

COMP Cams Steel Valve Spring Retainers - 792-16