Search
Close this search box.

HEMI – VALVE SPRING COMPRESSOR – RENTAL TOOL

Availability: 4 in stock

$205.00$255.00

SKU HEMI VALVESPRING TOOL Categories , ,

Buy or Rent –
At Last! A tool that can change valve springs while the engine is in the vehicle….change valve springs in minutes, not hours. User Friendly. A must have tool.Made from 6061 Aluminum Billet Fully CNC Hard Anodized for long life.After years of renting these tools out, we at AIR RAM PERFORMANCE have identified and improved all the weak points on this specific tool. The HEMI Valve Spring compressor tool you get from us will be superior to the original manufactures tool hands down! We have improved shaft’s that are threaded all the way through the tool and then we use a lock nut to prevent the shaft from turning under load, preventing the shaft from splitting the aluminum tool. We have also replaced the thin nut which only had (4 threads)with a 1″ long nut with 18 threads for increased surface area when compressing the springs. This prevents the thinner nut from eating the threads of the shaft as the load increases.

 

BUY OR RENT TOOL RENTAL TOOL MISUSE & DAMAGED TOOL POLICY

You have the option to BUY or RENT this tool. You must select your intention to rent or buy when adding to your cart. Customers who elect to purchase the tool will be subjected to the 20% restocking fee if they return the tool.

This is a cheap alternative to purchasing the tool.

Customer MUST select “I PLAN TO RENT THIS TOOL”  – Customer pays FULL PRICE at check out.  A refund is issued once tool is returned.  If the customer keeps the tool, the transaction is completed and no further action is required. Basically the customer will have zero refund after 15 weeks. When the tool is returned, then a refund is issued based on the time the tool was in the customers possession + initial shipping + pay pal fees associated with the transaction.

RENTAL PRICE is $15.00 a week + Pay Pal fees & ALL SHIPPING EXPENSES. Each day after the first week is prorated at $2.14 per day. This is a cheap alternative to purchasing the tool if you only plan to do valve springs one time.

Once the tool is ordered we will ship the tool to you. The clock will start after you receive the tool per the tracking number. If you use the tool and return it within a week we will only charge you the 15.00 + Pay Pal Fees + Shipping cost to your location. We use the tracking number pick up date as the last day. Its 15.00 minimum first week then prorated each day for $2.14 each additional day after the first 7 days.

The great news is that most customers return the tools in great shape with no damage at all. We do understand tools get used and take that into consideration when inspecting the tools upon return. So we would never hold normal wear and tear against a customer. EVERY tool we ship has been inspected for defects and repaired upon return and then inspected again prior to packaging for the next customer, we do NOT ship damaged tools. The way these tools get damaged is when pneumatic power tools are applied.

IF YOU USE POWER TOOLS ON THIS TOOL YOU WILL DAMAGE IT!

DO NOT USE POWER TOOLS WITH THIS TOOL!

And due to the tool being made out of aluminum, it will be VERY obvious that power tools where used. Customer is responsible for the tool while in their possession. We inspect each tool prior to shipping to insure we ship you a working tool. We don’t want to deny a refund but will if tool is damaged. Prior to issuing the deposit refund we will inspect all tools. Damaged tools will be the responsibility of the customer and void any implied refund. Tool will be replaced with their deposit. If a tool is damaged and we deny the refund, the customer can request we return that tool to them but they are responsible for return shipping to their address.

IMPORTANT!! If you receive a damaged tool (Unlikely) please take a picture of it the moment it arrives and text it to us @ (817) 800-7760 that same day. This is the ONLY way out of being responsible for a damaged tool. We will verify the tracking number arrival date & time and the date & time the picture is sent to determine who is responsible. Again, we do not ship damaged tools… so this is a very unlikely scenario. Please keep these tools in good shape for the next user. We are only able to provide this affordable service to you because the customer before you took care of the tool. The great news is that most customers return the tools in great shape with no damage at all because they didn’t use power tools! If you follow the instructions and use hand tools… these tools will last a lifetime and you will not have to worry about replacing damaged parts.

COST OF REPAIR (CUSTOMERS EXPENSE)

  • 1x Main Shaft Bolt – Missing, Bent or Damaged threads = $10.00
  • 1x Main Shaft “lock nut” – Missing, Damaged threads = $5.00
  • 1x Main Shaft Nut – Missing, Damaged Threads, mangled exterior = $5.00
  • 2x Pedestal BOLTS – Missing, Damaged Threads or bolt head = $5.00 each
  • 2x Pedestal Washers – Missing, Damaged = $5.00 each – 1x Main Tool Body
  • x Main tool body – Missing, Damaged/ body other than “normal” wear and tear. = NO REFUND Keep Tool
  • 1x Tool Fork – Missing, Damaged fork other than “normal” wear and tear. = NO REFUND Keep Tool
Weight 1 lbs
Dimensions 10 × 6 × 2 in
CHOOSE BASIC OPTIONS

I PLAN TO BUY AND KEEP THIS TOOL, I PLAN TO RENT AND RETURN THIS TOOL

MAKE MODEL YEAR
MAKE MODEL YEAR
DODGE DURANGO 2004 - 2019
DODGE DURANGO 2018 - 2019
DODGE DURANGO 2021
DODGE DURANGO 2021
DODGE DURANGO 2021

You May Also Like:

Scroll to Top