{"id":647,"date":"2021-04-08T03:08:25","date_gmt":"2021-04-08T03:08:25","guid":{"rendered":"http:\/\/airram.flywheelsites.com\/?post_type=product&p=647"},"modified":"2024-04-06T16:28:30","modified_gmt":"2024-04-06T16:28:30","slug":"air_temp_sensor-24-extension-wire","status":"publish","type":"product","link":"https:\/\/airram.com\/product\/air_temp_sensor-24-extension-wire\/","title":{"rendered":"Air Temp Sensor 24″ Extension Wire"},"content":{"rendered":"
\n

“MADE IN THE USA”<\/strong><\/p>\n

Extend your harness 24″ with factory connectors in your new Dodge\/Jeep\/Chrysler in little as 1-2 minutes of your time! Great for those who are installing a newer intake manifold onto their 1999-2002 4.7L engines. Or if installing a cold air intake that places the sensor slightly out of range.\u00a0\u00a0 Also great to use for simply relocating your Intake Air Temp Sensor to a cooler location in the intake tract closer to the filter area which increases performance. The cooler the location you mount the sensor in, that cooler air causes the PCM to advance the timing equating to improved throttle responsiveness. This is an old trick we used and can be work up to 8-10 RWHP and is exactly what led to the development of the =AIR=RAM=>Power Wire.<\/a><\/p>\n

This is popular for customers swapping out their 1999-2007 4.7L intake manifolds for the 2008-2013 intake manifolds<\/a>.<\/p>\n<\/div>\n

EARN A $20.00 REFUND<\/strong> VERIFY APPLICATION BEFORE PURCHASE<\/strong> APPLICATIONS<\/strong> WHAT IS AN EXTENSION WIRE?<\/strong> <\/p>\n

If you have a vehicle not listed and verify with the pictures that your vehicle may have the same plug. Purchase the Extension Wire and then test it, if it works, update us with the year make and model that you have, and send us pics of our Power Wire installed on your vehicle, we will issue a $20.00 refund off your Power Wire order.<\/p>\n

PLEASE VERIFY PRIOR TO ORDERING \u2013 Chrysler made an AIT sensor change on some vehicles\u2026 Please look at the pictures and verify your vehicle plug to our pictures. If your unsure, send us a picture of your factory plug and sensor end and we can verify for you. <\/p>\n

The EXTENSION WIRE will fit: – Works with ANY\/ALL stock or aftermarket induction system – May also fit many other 2000 to present Dodge vehicles – Installs in little as 1-2 minutes of your time! -We will only list them as we learn if they fit or not.<\/p>\n

NOTE: **Chrysler made an Intake temperature sensor change on some vehicles\u2026<\/p>\n