Comp Cams Valve Springs
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
Valve Spring Specs - 26918-16
Valve Spring, Single, Beehive, 1.075 in. Outside Diameter, 372 lbs./in. Rate, 1.100 in. Coil Bind, Set of 16
Brand: COMP Cams
Manufacturer’s Part Number:26918-16
Part Type: Valve Springs
Product Line: COMP Cams Valve Springs
Valve Spring Style: Beehive
Number of Springs Per Valve: Single
Outside Diameter of Outer Spring (in.): 1.075 in.
Coil Bind Height (in.): 1.100 in.
Damper Spring Included: No
Spring Rate (lbs/in.): 372 lbs./in.
Inside Diameter of Outer Spring (in.): 0.650 in.
Valve Springs Coated: No
Quantity: Sold as a set of 16.
Notes: O.D. at the top of the spring is 1.075 in. and 1.310 in. at the bottom. I.D. at the top of the spring is 0.650 in. and 0.885 in. at the bottom.
- Installed Height (in.): 1.800 in.
- Seat Pressure at Installed Height (lbs.): 125 lbs.
- Open Height (in.)(application): 1.150 in.
- Open Pressure (lbs.): 367 lbs.
COMP Cams warrants its products to be free from defects in material and workmanship for one year from the date of purchase. This warranty is valid on camshafts only where new lifters and proper valve springs are used. This warranty is voided on any part used in racing applications or any cam part ending in -5, -6, -7, -8, or -9. Ultra Gold aluminum rocker arms carry a limited lifetime warranty.